The cleaning of HVAC ducts is something which is not considered to be an easy task we actually recommend a 24-hour AC repair Nashville company. Not only that, but it is also one of those things which people do not look forward to at all. In fact, they try to delay this as much as they can, hoping that a better alternative would come up.
In that case, if you are thinking about hiring a professional to clean up your HVAC ducts, the answer would be in the negative. Even though it might sound surprising, but it is true. That is because cleaning of air ducts is something which is quite simple and straightforward, even though it might not seem like that. Also, with the help of some basic cleaning equipment, you will be able to get it done on your own.
So, if you are curious to find out how you will be able to save your money by doing this on your own, read on below.
1. Cover the supply registers
The first thing that you would have to do is cover up the supply registers with paper towels. The reason why this needs to be done is to prevent the cold air from drifting off and spreading into the entire room. Besides, it also helps in keeping the dislodged dust to a minimum.
2. Turn on the fan
The next thing you need to do is activate the fan. That is because you would want the fan to be working while you are cleaning out the HVAC ducts. In this way, the dust would not be settling around your workspace.
3. Check the filters
While cleaning, you should also make sure that the furnace filter is in place. In this way, the loosened dust would not be getting pulled into the fan motor.
4. Loosen the dust which is fixated on the ducts
In the duct work, you might come across dirt which has built up. However, this is something which you would need to get rid of. Simply hold on the handle of your brush and tapping on any dust area that you find accessible.
5. Clean the supply registers
Now that you have gotten rid of all the loosened dust, it would now be time to focus your efforts on cleaning the supply registers. Again, this is something which can easily be done by using a vacuum while keeping the hose near the register. In addition, you should also keep in mind to keep the register lifted in order to get a better view.
6. Clean the return air registers
The chances of the return air registers being fastened with a screw are high. So before you get them cleaned, make sure to unfasten them and then get down to work.
7. Shut off the furnace and fan
While cleaning your HVAC ducts, it is also important to turn off the fan and the heater. However, just switching off the thermostat would not get the job done.
8. Clean out the return air boot and blower compartment
Thanks to the power being turned off, you would be able to get the fan compartment and front panels removed. By using the vacuum, you will then be able to remove the dust which seems to have built up in the lower compartment.
9. Get the furnace filter replaced
Even though you feel that you have cleaned your HVAC ducts sufficiently, it would not hurt to get your furnace filter replaced. In this way, you would be able to cut down on the amount of dust gathering in your system.
10. Turn the power back on
So now that you have finally completed all the steps, it would be safe to activate your HVAC system. You would now be able to enjoy fresher and cleaner air.
So that brings us to the tutorial regarding the cleaning of HVAC ducts. To know more, simply call us or drop us an email.